危险废物污染环境防治信息公示

Petrochemical heating furnace can prevent oil spillage

The petrochemical heating furnace includes a box body. The top plate of the box body is provided with a feed hole di, a feed pipe is fixedly connected to the side wall of the feed hole

Technical requirements for flue gas damper of petrochemical heating furnace

The petrochemical heating furnace flue gas baffle technology clearly requires that the leakage rate when the sealed baffle is closed should not exceed 1%; for the sealed adjustment baffle, it should not exceed 3%.

Working conditions of petrochemical heating furnace

Using hydrocarbons as raw materials to produce synthetic ammonia feed gas and hydrogen by steam reforming has a specific position in the synthetic ammonia, oil refining, petrochemical, metallurgical and other industrial sectors. The hydrogen production furnace of the refinery, the hydrogen production reformer of the methanol plant and the first-stage reformer of the synthetic ammonia plant are all petrochemical heating furnaces.

What are the preparations for the petrochemical heating furnace before starting the furnace?

Check whether the petrochemical heating furnace and burner accessories, and the process flow are installed correctly.

Optimization analysis of steel structure wall stiffeners of petrochemical heating furnace

In order to delay the buckling of the wall panel and improve its buckling bearing capacity, it is necessary to arrange a certain number of stiffeners on the wall panel. The current stiffener arrangement on the steel structure wall panel of the heating furnace is difficult to determine with the existing standard calculation methods.

Analysis on the technical indicators of petrochemical heating furnaces

Heat load of petrochemical heating furnace. That is, the ability of each petrochemical heating furnace to transfer heat to the medium in the tube per unit time indicates the production capacity of the petrochemical heating furnace.

The use of petrochemical heating furnace

The heating section of the petrochemical heating furnace is the main heating section, and the furnace gas temperature is relatively high to facilitate rapid heating. The soaking section is located at the discharge end, and the difference between the furnace gas temperature and the temperature of the metal material is very small, so as to ensure the uniform temperature of the section of the furnace billet.